Posts Tagged ‘SQL 2012’

BI Image X: SQL 2012 RC0 and VMWare Workstation 8

February 24, 2012 3 comments

Microsoft recently released the BI Image X: SQL 2012 RC0 which allows us to have a look at the latest technology and data visualization on SQL 2012 platform. However, again, it requires Hyper-V. I use windows 7 and I don’t want to dual boot my laptop. Hence, I decided to use VMware workstation 8 to host this.

Here is what you need:
•    VMware Workstation 8
•    VHD (downloaded from
•    WinImage ( )

Step by Steps:
1.    You need WinImage to convert your vhd into vmdk format. It will take quite long time. On my i7 laptop, it takes about half hour to do the conversion.
2.    Create a virtual adapter, shown as below (the one highlighted). Also read the “Prepare the Host Server” section on the Microsoft download page ( Basically, you need to create a VMware virtual network adapter equivalent to the Hyper-V virtual network.

3.    Create a VM using wizard. I gave the VM 4 processors and 8G ram as recommended by Microsoft.
4.    Use the existing virtual disk (vmdk)
5.    Start the VM and configure the network settings. (Instruction on MS download page). Basically, you set the network setting as the following:
•    IP Address:
•    Subnet mask:
•    DNS Server:
6.    To verify the configuration of the network settings, you can ping from you host via cmd: ping as well as ping form within your VM via cmd: ping Both commands should be successful.
7.    Rearm the VM and Reboot VM as required
8.    Add external Network card to you VM. Use the “Bridged” one. After adding the network card, you should be able to see two NIC in your VM settings, shown as below:

9.    Now you should be able to ping Internet as well.
10.    Take a snapshot of your working VM.
11.    Enjoy the demo.